• Ventus 72V 50Ah battery decal carbon fiber design — Summit MX
  • Ventus 72V 50Ah battery decal installed on an eMoto build — Summit MX
1 2

Summit MX

Ventus 72V 50Ah Battery Decal

Ventus 72V 50Ah Battery Decal

$25.00
$25.00
Sale Sold out

Cut to fit the Ventus 72V 50Ah pack, not trimmed down from a template meant for something else. The Carbon Fiber style gives the battery a woven carbon look with real depth and texture, printed on premium moto grade vinyl and sealed under a durable laminate so it shrugs off boots, roost and a pressure washer without costing what actual carbon costs.

Want it as a starting point instead? The Standard style is a clean black base, ready for your own logos, numbers or colors. Type what you want added in the text box when you order and we build it to match.

Fits the Ventus 72V 50Ah battery whether it came stock in your Ventus One or you dropped it into a Surron Light Bee, 79Bike Falcon or another build running the same pack. Every decal cures 18+ hours before it gets laminated.

View full details

CHOOSE YOUR FINISH

All 9 finishes are available on this product. Pick the look that suits your build — each finish is selectable in the dropdown above.

Gloss finish sample

Gloss

Classic high-shine finish that enhances color depth.

Matte finish sample

Matte

Soft, low-shine look for a stealthy, OEM-style appearance.

Sparkle finish sample

Sparkle

Eye catching sparkle with a gloss finish

Chrome Gloss finish sample

Chrome Gloss

Reflective chrome base with a high-shine clear coat.

Chrome Matte finish sample

Chrome Matte

Chrome base with a soft matte top coat — metallic without the mirror.

Most Popular
Chrome with Sparkle finish sample

Chrome with Sparkle

Chrome vinyl base with silver flake laminate. Our most-ordered finish.

Holographic Gloss finish sample

Holographic Gloss

Iridescent rainbow shift under high-shine clear laminate.

Holographic Matte finish sample

Holographic Matte

Holographic base with a soft matte laminate.

Holographic with Sparkle finish sample

Holographic with Sparkle

Holographic base layered with silver flake laminate.

Surface Preparation

  • Thoroughly clean the application area using isopropyl alcohol or a mild, residue-free cleaner.
  • Remove all dirt, grease, wax, and dust.
  • Ensure the surface is completely dry and smooth before applying.

Positioning the Decal

  • Before removing the backing, test-fit and align the decal on the surface.
  • Use masking tape to hold it in place if needed.
  • Once aligned, flip the decal up and slowly peel away the backing paper.

Applying the Decal

  • Starting from the center, press the decal down gradually, working from the center outward.
  • Use your hand, a soft squeegee, or a microfiber cloth to remove air bubbles as you go.
  • Apply firm, even pressure across the entire decal.

Post-Application & Heat Treatment

  • Once applied, go over the decal again with firm pressure to ensure full contact.
  • Carefully heat-treat the decal using a heat gun or small torch to activate the adhesive and help the vinyl conform to the plastic. Use low heat and keep the heat source moving at all times.

    Do not overheat — excessive heat can burn, distort, or damage the vinyl and laminate.
  • The vinyl should become slightly warm and more flexible, not hot.

This heat-treat step is critical for long-term adhesion, especially on curved plastics and high-wear areas.