• TECH ER30 283mm Rear Shock
  • TECH ER30 283mm Rear Shock, view 2
  • TECH ER30 283mm Rear Shock, view 3
  • TECH ER30 283mm Rear Shock, view 4
  • TECH ER30 283mm Rear Shock, view 5
  • TECH ER30 283mm Rear Shock, view 6
  • TECH ER30 283mm Rear Shock, view 7
  • TECH ER30 283mm Rear Shock, view 8
1 8

Modded Moto Co

TECH ER30 283mm Rear Shock

TECH ER30 283mm Rear Shock

$975.00
$975.00
Sale Sold out

A high-performance shock that delivers a balance of support and sensitivity at the rear end of the bike.

Designed and engineered specifically for lightweight E-motos.

COMPATIBILITY*

283 × 80 mm: Fits

  • E-Ride Pro 2.0 / 3.0 & SR (direct mount)

  • Surron Light Bee (linkage mount)

  • Ventus One / One Plus (linkage mount)

  • 79 Bike Pro / GT (linkage mount)

CUSTOM ADJUSTABILITY

In addition to pre-load and rebound adjustment, the ER30 features the CTS (Compression Tuning System), a patented Formula / TECH Suspension innovation that allows fast, tool-free tuning of low- to mid-speed compression behavior.

Spring rate options:

  • 78.8 N/mm (standard) — suitable for average-weight riders

  • 105.6 N/mm (optional) — recommended for heavier riders or harder riding conditions

PERFORMANCE FEATURES

  • Piggyback Reservoir: Increased oil volume improves thermal stability during long or aggressive riding.

  • Internal Floating Piston (IFP) with Dual Seals: Prevents oil and gas mixing for consistent damping and long-term reliability.

  • High-Profile MDU Bumper: Enhances end-stroke progression and increases bottom-out resistance.

  • DU Bushings: Provides smooth, low-friction articulation with excellent durability for high-load off-road use.

View full details

CHOOSE YOUR FINISH

All 9 finishes are available on this product. Pick the look that suits your build — each finish is selectable in the dropdown above.

Gloss finish sample

Gloss

Classic high-shine finish that enhances color depth.

Matte finish sample

Matte

Soft, low-shine look for a stealthy, OEM-style appearance.

Sparkle finish sample

Sparkle

Eye catching sparkle with a gloss finish

Chrome Gloss finish sample

Chrome Gloss

Reflective chrome base with a high-shine clear coat.

Chrome Matte finish sample

Chrome Matte

Chrome base with a soft matte top coat — metallic without the mirror.

Most Popular
Chrome with Sparkle finish sample

Chrome with Sparkle

Chrome vinyl base with silver flake laminate. Our most-ordered finish.

Holographic Gloss finish sample

Holographic Gloss

Iridescent rainbow shift under high-shine clear laminate.

Holographic Matte finish sample

Holographic Matte

Holographic base with a soft matte laminate.

Holographic with Sparkle finish sample

Holographic with Sparkle

Holographic base layered with silver flake laminate.

Surface Preparation

  • Thoroughly clean the application area using isopropyl alcohol or a mild, residue-free cleaner.
  • Remove all dirt, grease, wax, and dust.
  • Ensure the surface is completely dry and smooth before applying.

Positioning the Decal

  • Before removing the backing, test-fit and align the decal on the surface.
  • Use masking tape to hold it in place if needed.
  • Once aligned, flip the decal up and slowly peel away the backing paper.

Applying the Decal

  • Starting from the center, press the decal down gradually, working from the center outward.
  • Use your hand, a soft squeegee, or a microfiber cloth to remove air bubbles as you go.
  • Apply firm, even pressure across the entire decal.

Post-Application & Heat Treatment

  • Once applied, go over the decal again with firm pressure to ensure full contact.
  • Carefully heat-treat the decal using a heat gun or small torch to activate the adhesive and help the vinyl conform to the plastic. Use low heat and keep the heat source moving at all times.

    Do not overheat — excessive heat can burn, distort, or damage the vinyl and laminate.
  • The vinyl should become slightly warm and more flexible, not hot.

This heat-treat step is critical for long-term adhesion, especially on curved plastics and high-wear areas.