• FX Throttle
  • FX Throttle, view 5
  • FX Throttle, view 6
  • FX Throttle, view 7
  • FX Throttle, view 8
1 5

Modded Moto Co

FX Throttle

FX Throttle

$185.00
$185.00
Sale Sold out

A CNC-machined twist throttle with a Honeywell Hall sensor, titanium screws and a stainless steel bearing. Adjustable spring tension and a 65° rotation let you tailor the feel.

Choose your sensor and color

Bike / setup Fitment
For most Stock Bikes option Our standard sensor option. Match the bike and connector before ordering.
For Upgraded Controllers option Our wider-output sensor option for compatible programmable controllers. Confirm the required input range and calibration.

Fitment check before checkout

Your bike name alone does not confirm electrical compatibility. Check your controller model, throttle input range and plug. Select the option and color above, then add your exact bike and controller to the cart order notes.

If you need a Talaria, Super73, Altis or bare-wire connection, specify that requirement in the order notes and confirm it with us before ordering.

Availability

Check the selected color option for its current stock or back-order wording.

Construction reference: FX Classic. Connector and sensor selection must match the actual controller.

Unsure about your setup? Send us your bike model, year and current components before ordering.

View full details

CHOOSE YOUR FINISH

All 9 finishes are available on this product. Pick the look that suits your build — each finish is selectable in the dropdown above.

Gloss finish sample

Gloss

Classic high-shine finish that enhances color depth.

Matte finish sample

Matte

Soft, low-shine look for a stealthy, OEM-style appearance.

Sparkle finish sample

Sparkle

Eye catching sparkle with a gloss finish

Chrome Gloss finish sample

Chrome Gloss

Reflective chrome base with a high-shine clear coat.

Chrome Matte finish sample

Chrome Matte

Chrome base with a soft matte top coat — metallic without the mirror.

Most Popular
Chrome with Sparkle finish sample

Chrome with Sparkle

Chrome vinyl base with silver flake laminate. Our most-ordered finish.

Holographic Gloss finish sample

Holographic Gloss

Iridescent rainbow shift under high-shine clear laminate.

Holographic Matte finish sample

Holographic Matte

Holographic base with a soft matte laminate.

Holographic with Sparkle finish sample

Holographic with Sparkle

Holographic base layered with silver flake laminate.

Surface Preparation

  • Thoroughly clean the application area using isopropyl alcohol or a mild, residue-free cleaner.
  • Remove all dirt, grease, wax, and dust.
  • Ensure the surface is completely dry and smooth before applying.

Positioning the Decal

  • Before removing the backing, test-fit and align the decal on the surface.
  • Use masking tape to hold it in place if needed.
  • Once aligned, flip the decal up and slowly peel away the backing paper.

Applying the Decal

  • Starting from the center, press the decal down gradually, working from the center outward.
  • Use your hand, a soft squeegee, or a microfiber cloth to remove air bubbles as you go.
  • Apply firm, even pressure across the entire decal.

Post-Application & Heat Treatment

  • Once applied, go over the decal again with firm pressure to ensure full contact.
  • Carefully heat-treat the decal using a heat gun or small torch to activate the adhesive and help the vinyl conform to the plastic. Use low heat and keep the heat source moving at all times.

    Do not overheat — excessive heat can burn, distort, or damage the vinyl and laminate.
  • The vinyl should become slightly warm and more flexible, not hot.

This heat-treat step is critical for long-term adhesion, especially on curved plastics and high-wear areas.