1 3

Summit MX

CLT Ridez Edition Ultra Bee Graphics Kit

CLT Ridez Edition Ultra Bee Graphics Kit

$165.00
$165.00
Sale Sold out

A smooth gradient fade runs across every panel — deep at the edges, lifting through the middle, with no hard lines anywhere. Subtle up close, reads as one clean sweep from across the track. A special edition design you won't find in our standard lineup.

The CLT Ridez Edition is the complete version of the Fade kit. Alongside the rear fender, side fenders, and the plastic fenders on the battery lid, it adds the three pieces our standard kits leave out — a decal cut for the stock Sur-Ron Ultra Bee front number plate, the front fender decal, and the fork guard decals — so the whole bike lands in one order, cut and matched from the same artwork.

Bought separately these pieces come to $185. Add your number and pick any of our available vinyl and laminate options; every piece in the kit ships in the finish you choose.

Each decal is printed on premium moto-grade vinyl, cured a full 18+ hours before we laminate it, and sealed to hold up to roost, mud, washing, and UV — crisp color, ride after ride.

View full details

CHOOSE YOUR FINISH

All 9 finishes are available on this product. Pick the look that suits your build — each finish is selectable in the dropdown above.

Gloss finish sample

Gloss

Classic high-shine finish that enhances color depth.

Matte finish sample

Matte

Soft, low-shine look for a stealthy, OEM-style appearance.

Sparkle finish sample

Sparkle

Eye catching sparkle with a gloss finish

Chrome Gloss finish sample

Chrome Gloss

Reflective chrome base with a high-shine clear coat.

Chrome Matte finish sample

Chrome Matte

Chrome base with a soft matte top coat — metallic without the mirror.

Most Popular
Chrome with Sparkle finish sample

Chrome with Sparkle

Chrome vinyl base with silver flake laminate. Our most-ordered finish.

Holographic Gloss finish sample

Holographic Gloss

Iridescent rainbow shift under high-shine clear laminate.

Holographic Matte finish sample

Holographic Matte

Holographic base with a soft matte laminate.

Holographic with Sparkle finish sample

Holographic with Sparkle

Holographic base layered with silver flake laminate.

Surface Preparation

  • Thoroughly clean the application area using isopropyl alcohol or a mild, residue-free cleaner.
  • Remove all dirt, grease, wax, and dust.
  • Ensure the surface is completely dry and smooth before applying.

Positioning the Decal

  • Before removing the backing, test-fit and align the decal on the surface.
  • Use masking tape to hold it in place if needed.
  • Once aligned, flip the decal up and slowly peel away the backing paper.

Applying the Decal

  • Starting from the center, press the decal down gradually, working from the center outward.
  • Use your hand, a soft squeegee, or a microfiber cloth to remove air bubbles as you go.
  • Apply firm, even pressure across the entire decal.

Post-Application & Heat Treatment

  • Once applied, go over the decal again with firm pressure to ensure full contact.
  • Carefully heat-treat the decal using a heat gun or small torch to activate the adhesive and help the vinyl conform to the plastic. Use low heat and keep the heat source moving at all times.

    Do not overheat — excessive heat can burn, distort, or damage the vinyl and laminate.
  • The vinyl should become slightly warm and more flexible, not hot.

This heat-treat step is critical for long-term adhesion, especially on curved plastics and high-wear areas.