• Surron LBX and Eride Pro side fender decal, design option 1 in black with white number — Summit MX
  • Side fender decal with number 22 installed on a Surron, dark lifestyle shot — Summit MX
  • Surron LBX and Eride Pro side fender decal design options 1 through 8 with number 00 — Summit MX
  • Rider number font options, fonts 1 to 14, for Summit MX custom decals
1 4

Summit MX

Surron LBX/Eride Pro Side Fender Decals

Surron LBX/Eride Pro Side Fender Decals

$20.00
$25.00 $20.00
Sale Sold out

Set your Surron LBX or Eride Pro apart with pre-designed side fender decals built to dial in the look of your build. Each option pairs carefully selected logos and placements for a clean, finished factory-style look.

Every decal is precision-cut to fit the LBX and Eride Pro side fenders, so it lines up right the first time with no trimming or guesswork.

Finish options:

  • Gloss & Matte – classic, clean look in your choice of sheen
  • Silver Sparkle (Gloss) – added metallic flake for extra depth
  • Chrome (Gloss & Matte) – bold, reflective mirror-style finish
  • Holographic (Gloss & Matte) – color-shifting shine that pops in the light
  • Chrome with Silver Sparkle (Gloss) – our most popular combo for maximum standout

Printed on premium moto-grade vinyl and sealed with a protective laminate, these decals stand up to roost, mud, washing, and UV exposure so your graphics stay sharp ride after ride.

Don't see a design you like? Design your own decal here.

View full details

CHOOSE YOUR FINISH

All 9 finishes are available on this product. Pick the look that suits your build — each finish is selectable in the dropdown above.

Gloss finish sample

Gloss

Classic high-shine finish that enhances color depth.

Matte finish sample

Matte

Soft, low-shine look for a stealthy, OEM-style appearance.

Sparkle finish sample

Sparkle

Eye catching sparkle with a gloss finish

Chrome Gloss finish sample

Chrome Gloss

Reflective chrome base with a high-shine clear coat.

Chrome Matte finish sample

Chrome Matte

Chrome base with a soft matte top coat — metallic without the mirror.

Most Popular
Chrome with Sparkle finish sample

Chrome with Sparkle

Chrome vinyl base with silver flake laminate. Our most-ordered finish.

Holographic Gloss finish sample

Holographic Gloss

Iridescent rainbow shift under high-shine clear laminate.

Holographic Matte finish sample

Holographic Matte

Holographic base with a soft matte laminate.

Holographic with Sparkle finish sample

Holographic with Sparkle

Holographic base layered with silver flake laminate.

Surface Preparation

  • Thoroughly clean the application area using isopropyl alcohol or a mild, residue-free cleaner.
  • Remove all dirt, grease, wax, and dust.
  • Ensure the surface is completely dry and smooth before applying.

Positioning the Decal

  • Before removing the backing, test-fit and align the decal on the surface.
  • Use masking tape to hold it in place if needed.
  • Once aligned, flip the decal up and slowly peel away the backing paper.

Applying the Decal

  • Starting from the center, press the decal down gradually, working from the center outward.
  • Use your hand, a soft squeegee, or a microfiber cloth to remove air bubbles as you go.
  • Apply firm, even pressure across the entire decal.

Post-Application & Heat Treatment

  • Once applied, go over the decal again with firm pressure to ensure full contact.
  • Carefully heat-treat the decal using a heat gun or small torch to activate the adhesive and help the vinyl conform to the plastic. Use low heat and keep the heat source moving at all times.

    Do not overheat — excessive heat can burn, distort, or damage the vinyl and laminate.
  • The vinyl should become slightly warm and more flexible, not hot.

This heat-treat step is critical for long-term adhesion, especially on curved plastics and high-wear areas.