• Husqvarna Inspired Light Bee Graphics Kit
  • Rider number font options, fonts 1 to 14, for Summit MX graphics kits and number plates
  • Rider name font options, fonts 1 to 14, for Summit MX graphics kits and number plates
1 3

Summit MX

Husqvarna Inspired Light Bee Graphics Kit

Husqvarna Inspired Light Bee Graphics Kit

$160.00
$160.00
Sale Sold out

Custom Requests

Want something changed on your order? Email info@summitmx.us with your order number in the subject line and tell us what you need. Different logo, color swap, layout tweak, whatever it is. We check that inbox before every order goes to design, so your request won't get missed.

The Husqvarna Inspired kit takes the factory race look and cuts it to fit the Light Bee. Blue, white and yellow with that clean Swedish race team look. It is our own artwork drawn on the Light Bee's actual panels, so everything lines up where it should instead of getting stretched off some full size bike template.

The kit covers the bike's plastics, number plate included. Add your rider number and rider name, pick a font for each from the charts in the photos, and we print them right into the kit at no extra charge.

Pick any of our nine finishes. Gloss and Matte are the classics, Sparkle adds a glitter laminate over the top, and Chrome and Holographic swap in premium vinyl that actually catches light. Chrome with Sparkle is the one most people end up choosing. Everything is printed on moto grade vinyl, cured a full 18 hours before we laminate it, and sealed to hold up to roost, pressure washers and sun.

Only need one part? Every piece of this design is also sold on its own: the number plate for 2024 and earlier bikes, number plate for 2025 and newer bikes, battery lid, battery decals, frame decals, front fender, rear fender, fork guards and swing arm. Pick the Husqvarna Inspired style on any of them and it matches this kit.

Moto Inspired designs are original Summit MX artwork inspired by classic factory race colors. Not affiliated with or endorsed by Husqvarna.

View full details

CHOOSE YOUR FINISH

All 9 finishes are available on this product. Pick the look that suits your build — each finish is selectable in the dropdown above.

Gloss finish sample

Gloss

Classic high-shine finish that enhances color depth.

Matte finish sample

Matte

Soft, low-shine look for a stealthy, OEM-style appearance.

Sparkle finish sample

Sparkle

Eye catching sparkle with a gloss finish

Chrome Gloss finish sample

Chrome Gloss

Reflective chrome base with a high-shine clear coat.

Chrome Matte finish sample

Chrome Matte

Chrome base with a soft matte top coat — metallic without the mirror.

Most Popular
Chrome with Sparkle finish sample

Chrome with Sparkle

Chrome vinyl base with silver flake laminate. Our most-ordered finish.

Holographic Gloss finish sample

Holographic Gloss

Iridescent rainbow shift under high-shine clear laminate.

Holographic Matte finish sample

Holographic Matte

Holographic base with a soft matte laminate.

Holographic with Sparkle finish sample

Holographic with Sparkle

Holographic base layered with silver flake laminate.

Surface Preparation

  • Thoroughly clean the application area using isopropyl alcohol or a mild, residue-free cleaner.
  • Remove all dirt, grease, wax, and dust.
  • Ensure the surface is completely dry and smooth before applying.

Positioning the Decal

  • Before removing the backing, test-fit and align the decal on the surface.
  • Use masking tape to hold it in place if needed.
  • Once aligned, flip the decal up and slowly peel away the backing paper.

Applying the Decal

  • Starting from the center, press the decal down gradually, working from the center outward.
  • Use your hand, a soft squeegee, or a microfiber cloth to remove air bubbles as you go.
  • Apply firm, even pressure across the entire decal.

Post-Application & Heat Treatment

  • Once applied, go over the decal again with firm pressure to ensure full contact.
  • Carefully heat-treat the decal using a heat gun or small torch to activate the adhesive and help the vinyl conform to the plastic. Use low heat and keep the heat source moving at all times.

    Do not overheat — excessive heat can burn, distort, or damage the vinyl and laminate.
  • The vinyl should become slightly warm and more flexible, not hot.

This heat-treat step is critical for long-term adhesion, especially on curved plastics and high-wear areas.