• EXT Ferro fork guard decal design layout — Summit MX
  • EXT Ferro fork tube decal sparkle finish installed on suspension fork
1 2

Summit MX

Build Your Own EXT Ferro Fork Guard Decals

Build Your Own EXT Ferro Fork Guard Decals

$20.00
$25.00 $20.00
Sale Sold out

Our fully customizable decals give you complete control over your design from start to finish. Choose your logos, adjust logo placement, dial in colors, and fine-tune the overall design to match your exact vision. You're not locked into a preset, every element can be moved, resized, or changed.

You can also upload your own logos and images, making it easy to add personal branding, sponsor logos, or one-off graphics. Whether you're going for a factory race look or something totally unique, these decals are built to let you create exactly what you want.

View full details

CHOOSE YOUR FINISH

All 9 finishes are available on this product. Pick the look that suits your build — each finish is selectable in the dropdown above.

Gloss finish sample

Gloss

Classic high-shine finish that enhances color depth.

Matte finish sample

Matte

Soft, low-shine look for a stealthy, OEM-style appearance.

Sparkle finish sample

Sparkle

Eye catching sparkle with a gloss finish

Chrome Gloss finish sample

Chrome Gloss

Reflective chrome base with a high-shine clear coat.

Chrome Matte finish sample

Chrome Matte

Chrome base with a soft matte top coat — metallic without the mirror.

Most Popular
Chrome with Sparkle finish sample

Chrome with Sparkle

Chrome vinyl base with silver flake laminate. Our most-ordered finish.

Holographic Gloss finish sample

Holographic Gloss

Iridescent rainbow shift under high-shine clear laminate.

Holographic Matte finish sample

Holographic Matte

Holographic base with a soft matte laminate.

Holographic with Sparkle finish sample

Holographic with Sparkle

Holographic base layered with silver flake laminate.

Surface Preparation

  • Thoroughly clean the application area using isopropyl alcohol or a mild, residue-free cleaner.
  • Remove all dirt, grease, wax, and dust.
  • Ensure the surface is completely dry and smooth before applying.

Positioning the Decal

  • Before removing the backing, test-fit and align the decal on the surface.
  • Use masking tape to hold it in place if needed.
  • Once aligned, flip the decal up and slowly peel away the backing paper.

Applying the Decal

  • Starting from the center, press the decal down gradually, working from the center outward.
  • Use your hand, a soft squeegee, or a microfiber cloth to remove air bubbles as you go.
  • Apply firm, even pressure across the entire decal.

Post-Application & Heat Treatment

  • Once applied, go over the decal again with firm pressure to ensure full contact.
  • Carefully heat-treat the decal using a heat gun or small torch to activate the adhesive and help the vinyl conform to the plastic. Use low heat and keep the heat source moving at all times.

    Do not overheat — excessive heat can burn, distort, or damage the vinyl and laminate.
  • The vinyl should become slightly warm and more flexible, not hot.

This heat-treat step is critical for long-term adhesion, especially on curved plastics and high-wear areas.